# # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See for detailed information. # In particular, see # # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/access_log" # with ServerRoot set to "/usr/local/apache2" will be interpreted by the # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" # will be interpreted as '/logs/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/usr/local" # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:/var/run # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 192.168.0.220:80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module libexec/apache24/mod_authn_file.so #LoadModule authn_dbm_module libexec/apache24/mod_authn_dbm.so #LoadModule authn_anon_module libexec/apache24/mod_authn_anon.so #LoadModule authn_dbd_module libexec/apache24/mod_authn_dbd.so #LoadModule authn_socache_module libexec/apache24/mod_authn_socache.so LoadModule authn_core_module libexec/apache24/mod_authn_core.so LoadModule authz_host_module libexec/apache24/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache24/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache24/mod_authz_user.so #LoadModule authz_dbm_module libexec/apache24/mod_authz_dbm.so #LoadModule authz_owner_module libexec/apache24/mod_authz_owner.so #LoadModule authz_dbd_module libexec/apache24/mod_authz_dbd.so LoadModule authz_core_module libexec/apache24/mod_authz_core.so LoadModule access_compat_module libexec/apache24/mod_access_compat.so LoadModule auth_basic_module libexec/apache24/mod_auth_basic.so #LoadModule auth_form_module libexec/apache24/mod_auth_form.so #LoadModule auth_digest_module libexec/apache24/mod_auth_digest.so #LoadModule allowmethods_module libexec/apache24/mod_allowmethods.so #LoadModule file_cache_module libexec/apache24/mod_file_cache.so #LoadModule cache_module libexec/apache24/mod_cache.so #LoadModule cache_disk_module libexec/apache24/mod_cache_disk.so #LoadModule cache_socache_module libexec/apache24/mod_cache_socache.so #LoadModule socache_shmcb_module libexec/apache24/mod_socache_shmcb.so #LoadModule socache_dbm_module libexec/apache24/mod_socache_dbm.so #LoadModule socache_memcache_module libexec/apache24/mod_socache_memcache.so #LoadModule macro_module libexec/apache24/mod_macro.so #LoadModule dbd_module libexec/apache24/mod_dbd.so #LoadModule dumpio_module libexec/apache24/mod_dumpio.so #LoadModule buffer_module libexec/apache24/mod_buffer.so #LoadModule ratelimit_module libexec/apache24/mod_ratelimit.so LoadModule reqtimeout_module libexec/apache24/mod_reqtimeout.so #LoadModule ext_filter_module libexec/apache24/mod_ext_filter.so #LoadModule request_module libexec/apache24/mod_request.so #LoadModule include_module libexec/apache24/mod_include.so LoadModule filter_module libexec/apache24/mod_filter.so #LoadModule substitute_module libexec/apache24/mod_substitute.so #LoadModule sed_module libexec/apache24/mod_sed.so #LoadModule deflate_module libexec/apache24/mod_deflate.so LoadModule mime_module libexec/apache24/mod_mime.so LoadModule log_config_module libexec/apache24/mod_log_config.so #LoadModule log_debug_module libexec/apache24/mod_log_debug.so #LoadModule logio_module libexec/apache24/mod_logio.so LoadModule env_module libexec/apache24/mod_env.so #LoadModule mime_magic_module libexec/apache24/mod_mime_magic.so #LoadModule cern_meta_module libexec/apache24/mod_cern_meta.so #LoadModule expires_module libexec/apache24/mod_expires.so LoadModule headers_module libexec/apache24/mod_headers.so #LoadModule unique_id_module libexec/apache24/mod_unique_id.so LoadModule setenvif_module libexec/apache24/mod_setenvif.so LoadModule version_module libexec/apache24/mod_version.so #LoadModule remoteip_module libexec/apache24/mod_remoteip.so #LoadModule proxy_module libexec/apache24/mod_proxy.so #LoadModule proxy_connect_module libexec/apache24/mod_proxy_connect.so #LoadModule proxy_ftp_module libexec/apache24/mod_proxy_ftp.so #LoadModule proxy_http_module libexec/apache24/mod_proxy_http.so #LoadModule proxy_fcgi_module libexec/apache24/mod_proxy_fcgi.so #LoadModule proxy_scgi_module libexec/apache24/mod_proxy_scgi.so #LoadModule proxy_wstunnel_module libexec/apache24/mod_proxy_wstunnel.so #LoadModule proxy_ajp_module libexec/apache24/mod_proxy_ajp.so #LoadModule proxy_balancer_module libexec/apache24/mod_proxy_balancer.so #LoadModule proxy_express_module libexec/apache24/mod_proxy_express.so #LoadModule session_module libexec/apache24/mod_session.so #LoadModule session_cookie_module libexec/apache24/mod_session_cookie.so #LoadModule session_crypto_module libexec/apache24/mod_session_crypto.so #LoadModule ssl_module libexec/apache24/mod_ssl.so #LoadModule lbmethod_byrequests_module libexec/apache24/mod_lbmethod_byrequests.so #LoadModule lbmethod_bytraffic_module libexec/apache24/mod_lbmethod_bytraffic.so #LoadModule lbmethod_bybusyness_module libexec/apache24/mod_lbmethod_bybusyness.so LoadModule unixd_module libexec/apache24/mod_unixd.so #LoadModule dav_module libexec/apache24/mod_dav.so LoadModule status_module libexec/apache24/mod_status.so LoadModule autoindex_module libexec/apache24/mod_autoindex.so #LoadModule asis_module libexec/apache24/mod_asis.so #LoadModule info_module libexec/apache24/mod_info.so #LoadModule cgi_module libexec/apache24/mod_cgi.so #LoadModule cgid_module libexec/apache24/mod_cgid.so #LoadModule dav_fs_module libexec/apache24/mod_dav_fs.so #LoadModule vhost_alias_module libexec/apache24/mod_vhost_alias.so #LoadModule negotiation_module libexec/apache24/mod_negotiation.so LoadModule dir_module libexec/apache24/mod_dir.so #LoadModule imagemap_module libexec/apache24/mod_imagemap.so #LoadModule actions_module libexec/apache24/mod_actions.so #LoadModule speling_module libexec/apache24/mod_speling.so #LoadModule userdir_module libexec/apache24/mod_userdir.so LoadModule alias_module libexec/apache24/mod_alias.so #LoadModule rewrite_module libexec/apache24/mod_rewrite.so LoadModule php5_module libexec/apache24/libphp5.so # Third party modules IncludeOptional etc/apache24/modules.d/[0-9][0-9][0-9]_*.conf # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User www Group www # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition. These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # ServerAdmin admin@loga.us # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName ldap1.loga.us:80 # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # blocks below. # AllowOverride none Require all denied # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/usr/local/www/apache24/data" # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.4/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # AllowOverride FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Require all granted # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # DirectoryIndex index.php index.html # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Require all denied # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog "/var/log/httpd-error.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a # container, they will be logged here. Contrariwise, if you *do* # define per- access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "/var/log/httpd-access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "/var/log/httpd-access.log" combined # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/usr/local/www/apache24/cgi-bin/" # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock cgisock # # "/usr/local/www/apache24/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # AllowOverride None Options None Require all granted # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/apache24/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/apache24/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # #EnableMMAP off #EnableSendfile on # Supplemental configuration # # The configuration files in the etc/apache24/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include etc/apache24/extra/httpd-mpm.conf # Multi-language error messages #Include etc/apache24/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include etc/apache24/extra/httpd-autoindex.conf # Language settings #Include etc/apache24/extra/httpd-languages.conf # User home directories #Include etc/apache24/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include etc/apache24/extra/httpd-info.conf # Virtual hosts #Include etc/apache24/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include etc/apache24/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include etc/apache24/extra/httpd-dav.conf # Various default settings #Include etc/apache24/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 Include etc/apache24/extra/proxy-html.conf # Secure (SSL/TLS) connections #Include etc/apache24/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # SSLRandomSeed startup builtin SSLRandomSeed connect builtin # # uncomment out the below to deal with user agents that deliberately # violate open standards by misusing DNT (DNT *must* be a specific # end-user choice) # # #BrowserMatch "MSIE 10.0;" bad_DNT # # #RequestHeader unset DNT env=bad_DNT # Include etc/apache24/Includes/*.conf SetHandler application/x-httpd-php SetHandler application/x-httpd-php-source Alias /phpldapadmin/ "/usr/local/www/phpldapadmin/htdocs/" Options none AllowOverride Limit Require all granted